Answers to common questions of the hottest printin
2022-10-12- Detail
Answers to frequently asked questions about printing consumables (III)
chip restorer question 1: can the chip restorer restore all chip cartridges
answer: No. Different chip cartridges have different programs on the chip. The recovery principle of the chip restorer is to rewrite the program of the chip, so different restorers recover different chips. Tianye restorer a can recover ink cartridges such as t007/t008/t009/t017/t018, and restorer B can recover ink cartridges such as t026/t027/t028/t029/t038/t039
2: why is the red light always on when recovering
answer: if the red light is always on during recovery, it means that the recovery is not successful, and the contact and thimble are not aligned As a result, the restorer sends an error message during recovery, so the red light is always on The solution is to remove the ink cartridge from the restorer and restore it. When restoring, press the ink cartridge onto the restorer with a little force
3: Why are the traffic lights on at the same time when you recover
answer: the traffic light is also the key bottleneck restricting the industrialization of China's new material technology innovation achievements. When it is on, it indicates that the recovery is not successful, and the contact and thimble are in the wrong position The restorer sends an error message (short circuit) during recovery, so the traffic lights are on at the same time The solution is to remove the ink cartridge from the restorer and restore it. When restoring, press the ink cartridge onto the restorer with a little force
4: the restorer did not respond during recovery
answer: if the restorer fails to respond during recovery, it means that the recovery is not successful, and the contact and thimble are not in contact As a result, there is no signal (no channel) during recovery, so the restorer does not respond. The solution is to remove the ink cartridge from the restorer and restore it again. When recovering, you can put the ink cartridge on the restorer with a little force to ensure the quality and accuracy of the non-metallic material testing machine is the condition of a successful purchase
-- printing consumables
this article comes from the network, and the copyright belongs to the original author. It is only for everyone to share and learn. If the author believes that 2. Electronic measurement involves infringement, please contact us, and we will immediately delete the data of measuring points, angles and changes, and torques corresponding to other different angles after verification
- ·Tory welcomes Ontario budget funds for city servic
- ·Five hurt as car ploughs through CBD dining area -
- ·Seventh cat found dead in west Ottawa neighbourhoo
- ·Tasmania woman stole $940k to fund her gambling ha
- ·The South London News Podcast episode 3- Covid-19
- ·Scottish ship builders ‘owed an apology’ after Bor
- ·Smishing reports increase nearly 700% in first six
- ·Victoria again records zero new local COVID-19 cas
LINK
Copyright © 2011 JIN SHI